Connect
one lead to an ignition reference
and insert FirstLook sensor
in the tailpipe
Click
Start
Get
instant results...It's that
simple!
ACE
Misfire Detective Software
The easiest way to identify
misfiring cylinders!
FirstLook
Sensor in tailpipe
At
times even the ECM can't detect
the misfire so relying on scan
tool data is not always the
solution. Thompson Auto Labs
has developed a proven system
that cures this headache for
the technician. No more guessing
which cylinder is causing the
problem. Simply insert the FirstLook™
sensor into the exhaust pipe,
connect a sync probe to an ignition
wire and press start on the
software. Immediately if there
is a miss you will be notified
which cylinder is causing the
symptoms. By inputting key information
into the software the ACE Misfire
Detective will also provide
the most likely cause of the
misfire - fuel system, ignition
system or mechanical problem.
Finding
misfires has never been easier!
Using the FirstLook™ Sensor
inserted in the tailpipe and
a sync probe connected to an
ignition wire or injector the
ACE Misfire Detective will immediately
identify the misfiring cylinder
on any gasoline vehicle foreign
or domestic.
Using
the vehicles O2 sensors
When
using the vehicles O2 sensors
the ACE Misfire software can
detect small combustion inefficiencies
caused be dirty injectors or
carbon build-up. This ability
makes the ACE Misfire software
the ultimate preventive maintenance
and emissions tool.
Hard
to find misfires
Save
time locating hard to find misfires,
the ACE Misfire Detective will
immediately detect the slightest
misfires which can be very elusive
using conventional methods.
After the misfire is found the
software will ask the technician
for addition information from
the vehicle and then let the
technician know where the most
likely cause of the problem
is - the ignition system, fuel
system, or a mechanical problem.
Click
Detail + Link Above For Even
More Info And Features Of ACE
Misfire Detective
At
times even the ECM can't detect
the misfire so relying on scan
tool data is not always the
solution. Thompson Auto Labs
has developed a proven system
that cures this headache for
the technician. No more guessing
which cylinder is causing the
problem. Simply insert the FirstLook™
sensor into the exhaust pipe,
connect a sync probe to an ignition
wire and press start on the
software. Immediately if there
is a miss you will be notified
which cylinder is causing the
symptoms. By inputting key information
into the software the ACE Misfire
Detective will also provide
the most likely cause of the
misfire - fuel system, ignition
system or mechanical problem.
